MDF Powder Coating

MDF Powder Coating About

This product is made of special formula and production process for medium density fiberboard substrate (MDF) coating powder coating, the coating has excellent mechanical properties and performance of indoor decoration, can be widely used in coating industry. Modern furniture is generally not recommended directly used for surface coating of various outdoor supplies.

Application

Can be made into a variety of colors and with a metallic flash effect of sand or hammer coating.

Low-temperature curing powder coatings are widely used in:

For MDF furniture and hardware finishes, such as commercial furniture, residential furniture, retail displays, office fitouts, kitchen and bath cabinets, etc.

Wood furniture industry (MDF, Medium Density Fiberboard)

Automotive components

Laboratory equipment

Carbon fiber substrates

Pipes, bottles, and containers

Feature

-Environmental friendly

-No solvents and volatile organic compounds involved which are harmful to the environment

-Energy saving,low curing temperature

-Excellent mechanical properties and chemical resistance

Application Methods:

Corona electrostatic spraying ,infrared oven cure

Curing guide	140/5-8min
Film thickness	70u90um
Average coverage	8110square meter/KG,with 70um (100% use rate)
Packing	Double PP bags, N.W 15kg/carton or 20kg/carton
Shelf life	6 month within 25,avoid direct sunlight

MDF Powder Coating VS Liquid Coatings

	Economical	Environmentally friendly	Process limitations	Coating efficiency	Coating properties
Powder coating	Low overall cost (coating + labor + energy consumption + storage), the overall cost of powder coating is 80-150 RMB/m2	The construction environment is free of volatilization, odor, and sewage; the finished product is zero VOC and can effectively seal harmful substances in the board, which is healthy and environmentally friendly. The coating can be almost 100% utilized.	Can process special-shaped parts; convenient for processing chamfers and edges of plates, making products more beautiful and durable	Fast curing speed, simple process: 1-2 steps, construction time 2-4 hours, low storage space requirements	The coating has excellent performance, good resistance to chemicals and solvents, and can effectively block formaldehyde
Liquid coatings	Low overall cost (paint + labor + energy consumption + storage), the overall cost of liquid paint is 200-150RMB/m2	High VOC, up to 31 kinds of chemical poisons volatilize, especially benzene, formaldehyde, aniline and diisocyanate toluene ester and other high-level substances. The effective utilization rate of the coating is low, and formaldehyde is released in the later stage.	The process is complicated, with 6-10 steps, and it cannot process special-shaped workpieces. It requires special edge sealing treatment in the later stage and is prone to cracking.	The process is complex, with 6-10 steps and 6-12 days of construction time, which requires a lot of manpower. The curing speed is slow and requires a lot of storage space.	The coating performance varies greatly depending on the type of product. It has poor water resistance, abrasion resistance and chemical resistance, and poor sealing performance against volatile substances such as formaldehyde.

Technical Indicators

Note on Substrate and Pretreatment:

Mechanical performance tests are conducted on 0.6 mm degreased cold-rolled steel panels.

Corrosion and aging resistance tests are conducted on 0.6 mm zinc-phosphated steel panels or chromated aluminum panels.

Film thickness: 6080 m

Curing condition: 120 C / 3 minutes (part temperature)

Performance Test Results

Item	Requirement / Result	Test Standard
Flexibility (Bending)	Pass, mandrel diameter 6 mm Pass, mandrel diameter 4 mm	ASTM D522 GB/T 1731
Dry Adhesion	Pass, result 5B Pass, result Grade 0	ASTM D3359 ISO 2409
Cupping (Erichsen)	Pass, 6 mm, no cracking or delamination	ISO 1520 GB/T 9753
Impact Resistance (Direct Impact)	50 kgcm	ASTM D2794 GB/T 1732
Pencil Hardness (Scratch Hardness)	H	ASTM D3363 GB/T 6739
Chemical Resistance	Good (tested with common acids, alkalis, and oils at room temperature)
Water Spray Resistance	Pass, 1000 h, no blistering or gloss loss	ASTM D1735
Water Immersion Resistance	Pass, 240 h, no blistering or gloss loss	ASTM D870
Neutral Salt Spray	Pass, 500 h, no blistering or coating failure	ISO 9227

Versatile and Durable MDF Surface Coating

Our MDF Powder Coating is engineered for industrial use, offering a combination of excellent adhesion and durable finish options for a wide range of MDF applications. Thanks to its fine powder form and advanced formulation, it meets industry standards for impact resistance, flexibility, and chemical endurance, providing long-lasting protection for furniture, panels, and decorative pieces.


Customizable Appearance and Reliable Performance

Whether you desire a smooth, matt, or glossy finish, our coating can be tailored to suit your aesthetic and functional requirements. Choose from various colors to perfectly match your project. Each layer forms a resilient barrier, maintaining its appearance and integrity even under demanding usage conditions for up to 12 months.