TGIC polyester powder coating

TGIC polyester powder coating About

Product description

This series of products uses saturated polyester resin and TGIC curing agent as the main base material to make thermosetting powder coating.

Product characteristics

• Good adhesion, good mechanical properties, tough coating film, meeting high strength requirements;
• Smooth coating film, high gloss;
• Suitable for long-term outdoor exposure product coating, good outdoor durability;
• Excellent over-baking resistance.

Special effects

Various wrinkles, metal, pearlescent effects and mixed colors, etc.

Transport packaging

Carton packaging, lined with two layers of PVC plastic bags, net weight of each box is 20kg. Non-dangerous goods can be transported in various ways, but should be kept away from direct sunlight, moisture and heat, and contact with chemicals.

Hygiene and safety

Operators should wear dust masks during use to avoid inhaling dust, and minimize long-term contact between skin and powder coating. Paint attached to the skin can be washed with soap.

Powder properties

Specific gravity	1.41.8g/cm (depending on the formula and color)
Particle size	Depending on the purpose, the standard type has an average particle size of 3540 microns, less than 10 microns powder <10%, greater than 100 microns powder <0.5%.
Volatile matter	<1%
Softening point	6095 varies depending on the color gloss
Storage stability	Polyester/TGIC powder coatings should be stored in a dry, ventilated room below 35, and avoid direct sunlight. If stored in an air-conditioned room, the powder must be stored at room temperature or the same (temperature) as the spraying equipment before use to avoid moisture. Under this condition, the powder can be stably stored for 12 months. If it exceeds the period, it must be re-tested. If the result meets the requirements, it can still be used. Note: For low-temperature curing types and powders with a gloss of less than 40% (60), the storage temperature should be below 30.

Coating properties

Test items	Inspection standard or method	Inspection index
Appearance	Visual inspection	Various board surface effects
Impact	GB/T 1732	50Kgcm
Bending	GB/T 6742	2mm
Cupping	GB/T 9753	8mm
Hardness	GB/T 6739	H2H
Adhesion	GB/T 9286	Level 0
Neutral salt spray resistance	GB/T 1771	500h; Scribed area: unidirectional rust 2.0mm; Unscribed area: no abnormality
Moisture and heat resistance	GB/T 1740	500h No abnormality
Artificial weather aging resistance	GB/T 1865	800h; Discoloration 2 level; Gloss loss 2 level
The above coating performance indicators may decrease slightly as the gloss decreases.
Spraying	This series of products are suitable for the following spraying methods: corona electrostatic spraying; friction electrostatic spraying; electrostatic fluidized bed spraying; fluidized bed hot dip coating.
Coating thickness: Use between 40150 microns, recommended film thickness is 5080 microns. Average coverage: 1012 square meters/kg, film thickness 60 microns (calculated based on 100% usage rate)
Curing conditions	200/10 minutes is recommended, and it can also be designed according to user needs: 160C/20 minutes, 180/10 minutes, etc.

Application areas

Suitable for various long-term outdoor exposure product coating:

1. Household appliances: outdoor units of air conditioners, indoor appliances and lamps with high lighting conditions;

2. Construction industry applications: colorful curtain walls, door and window frames, ceilings with high lighting conditions;

3. Traffic facilities: highway guardrails and grilles; 3. Auto parts, sports facilities, fitness equipment, gas station equipment, and courtyard facilities.

Superior Weather Protection

TGIC polyester powder coating is engineered for durability, providing high resistance to UV light and harsh outdoor conditions. This ensures long-lasting color fidelity and surface protection even in challenging climates, helping your projects stand the test of time.


Versatile Color and Finish Selection

Select from a broad array of custom colors and gloss levels-including matte, semi-gloss, and glossy finishes-to perfectly match your design requirements. This flexibility in appearance makes the coating suitable for automotive, architectural, and industrial tasks.


Efficient and Safe Application

Application methods like electrostatic spray, fluidized bed, or tribo techniques enable even coverage and excellent adhesion to metal substrates. The powder is non-toxic when handled as specified, ensuring safety during use and maintenance.