Pure polyester transparent powder coating

Pure polyester transparent powder coating About

Product Description

This series of products is made of polyester resin and hardener, and is made of high transparency materials.

Product Features

Excellent gloss and vividness, the coating is crystal clear;

High transparency and image clarity, accurately reflecting the base color;

Excellent leveling, highly smooth coating surface;

Long-term durability in harsh outdoor environments, maintaining the original color of the coating;

Good matching with a variety of paints and color powder coatings.

Application Areas

1. Designed for surface finishing of die-cast aluminum wheels, with ultra-high transparency and standard transparency;

2. Suitable as a high-performance finishing coating for various metal appliances, such as furniture metal tripods, bicycles, locks, door handles;

3. Suitable as a finishing protective layer for metal powder coatings

Transportation Packaging

Carton packaging, lined with two layers of polyvinyl chloride plastic bags, net weight of each box 20kg. Non-hazardous items can be transported in various ways, but should be kept away from direct sunlight, moisture and heat, and contact with chemicals.

Hygiene and safety

Operators should wear anti-sit masks during use to avoid inhaling dust and minimize long-term contact between skin and powder coating. Paint attached to the skin can be washed with soap.

Powder properties

Specific gravity	1.21.8g/cm
Particle size	Depending on the application, the standard type has an average particle size of 3540 microns, less than 10 microns of powder <10%, more than 100 microns of powder <0.5%.
Storage stability	Polyester powder coatings should be stored in a dry, ventilated room below 35C, and avoid direct sunlight. If stored in an air-conditioned room, the powder must be stored at room temperature or the same (temperature) as the spraying equipment before use to avoid moisture. Under this condition, the powder can be stably stored for more than 12 months. If it is exceeded, it must be re-tested. If the result meets the requirements, it can still be used.

Coating properties

Test items	Inspection standard or method	Inspection index
Appearance	Visual inspection	Various board surface effects
Impact	GB/T 1732	50Kgcm
Bending	GB/T 6742	2mm
Cupping	GB/T 9753	8mm
Hardness	GB/T 6739	H2H
Adhesion	GB/T 9286	Level 0
Neutral salt spray resistance	GB/T 1771	500h; Scribed area: unidirectional rust 2.0mm; Unscribed area: no abnormality
Moisture and heat resistance	GB/T 1740	500h No abnormality
Artificial weather aging resistance	GB/T 1865	800h; Discoloration 2 level; Gloss loss 2 level
The above coating performance indicators may decrease slightly as the gloss decreases.
Spraying	This series of products can be suitable for the following spraying methods: corona electrostatic spraying; friction electrostatic spraying; electrostatic fluidized bed spraying; fluidized bed hot dip coating.
Coating thickness: between 40 and 150 microns, depending on the application requirements.
Curing conditions	Recommended 200/10 minutes, can also be designed according to user needs: 160/20 minutes, 180/10 minutes

Superior Clarity and Protection

This pure polyester transparent powder coating offers exceptional clarity, ensuring the natural appearance of metal substrates remains visible while being shielded from environmental elements. Its excellent UV and weather resistance makes it suitable for both indoor and outdoor applications, providing long-lasting protection and enhanced durability to metal surfaces.


Efficient and Eco-Friendly Application

Applied through an electrostatic spray, the powder adheres efficiently to various metals. The solvent-free, non-toxic composition makes it a safe and environmentally conscious choice for commercial and industrial projects. Its quick curing time at 180-200C streamlines production without compromising performance or safety.