High performance epoxy powder coating MT-100

Send Inquiry

Request To Call Back

High performance epoxy powder coating MT-100

Get a Price/Quote

High performance epoxy powder coating MT-100 Specification

Chemical Name
High Performance Epoxy Powder Coating MT-100

Type
Epoxy Powder Coating

Standard
Industry Standard

Grade
Industrial Grade

Usage
Surface Coating/Protection

Appearance
Fine Powder

Physical Form
Powder

Pack Size
Available in 25 kg and 50 kg drums

Pack Type
Sealed Drums

Curing Temp
Typically 180-200C

Shelf Life
12-18 months under cool, dry storage

Film Thickness
60-120 m suggested

Color
Various colors available as per requirement

Adhesion
Excellent adhesion to metal substrates

Flexibility
Good flexibility and impact resistance

Storage Condition
Store in a cool, dry, and well-ventilated area

Application Method
Electrostatic spraying and baking

Corrosion Resistance
High, suitable for harsh environments

Toxicity
Non-toxic under recommended conditions

High performance epoxy powder coating MT-100 About

Product description

MT-100 is a series epoxy based powder coatings that exhibit excellent corrosion protection and chemical resistance when applied over a properly prepared metal substrate. MT-100 is designed for interior application only. MT-100 powders are available in gloss, satin, matt and texture finishes in a wide range of colors.

Powder properties

	Typical value
Chemical Type	Epoxy
Density	1.2 1.9 g/cm, depending on colour and effect
Recommended film thickness	60 90m
Shelf life	12 months
Storage Conditions	Under dry, cool ( 25C) conditions (open boxes must be resealed)
Curing schedule	15-20 min at 180C 9-12 min at 190C 5-7 min at 200C

Pre-treatment

Aluminium components should receive a full multi-stage chromate conversion coating or suitable chrome-free pre-treatment or suitable pre-anodising to clean and condition the substrate. Detailed advice should be sought from the pre-treatment supplier. Iron phosphate and particularly Zinc phosphating of ferrous metals improves corrosion resistance. Aluminium substrates may require a chromate conversion coating.

Test conditions

Actual product performance will depend upon the circumstances under which the product is used. The results are based on mechanical and chemical tests which (unless otherwise indicated) have been carried out under laboratory conditions and are given for guidance only.

Pre-treatment	Zinc Phosphate
Substrate	Polished steel
Curing schedule	5 min at 200C (object temperature)
Film Thickness	60 70m

Mechanical tests

	Typical value	Method/standard
Adhesion	Class 0	ISO 2409 (2 mm Crosshatch)
Erichsen cupping	Pass 5 mm	ISO 1520
Flexibility	Pass 5 mm	ISO 1519
Hardness	Pass no penetration to substrate	ISO 1518-1 (2000g)
Impact resistance	Pass 2.5 Joules reverse & direct (20 in lb)	ISO 6272-2 (d/r)

Chemical and durability tests

Whilst maintaining the general protective and anti-corrosive properties of powder coatings, aluminum and copper/bronze metallic finishes, when submitted to the listed tests, may rapidly show a loss of metallic aspect. The results shown are based on tests which (unless otherwise indicated) have been carried out under laboratory conditions and are given for advice only, actual performance depends upon the circumstances under which the product is used.

	Typical value	Method/standard
Chemical Resistance	Excellent resistance to acid, alkalis, oils and chemicals at room temperatures.
Salt spray test	Pass, no corrosion creep more than 3 mm from scribe, 500 h	ISO 9227

Environmental and durability tests

	Typical value	Method/standard
Humidity	Pass no blistering or loss of gloss, 1000 h	ISO 6270-2 CH (Constant humidity)
Exterior durability	Some chalking and loss of gloss after 3-6 months continuous outdoor exposure. Protective properties retained. Not recommended for outdoor applications.

Repair

Surface preparation	Damaged areas must be clean and free of grease or rust. Dry-sand the area with 600 grade paper down to the substrate. The area must be completely free of dust and cleaned with a non-aggressive solvent before proceeding. Any damage of the coating system must be repaired as soon as possible.
Application	For repairs a PU (2K or 1K) liquid paint is recommended.

Application

Powders can be applied by manual or automatic electrostatic spray equipment. Applicators and fabricators are advised to use a single batch for parts that will be assembled together. Differences are more likely with special effect powders. Bonded products have better application properties than blended products (more stable) but attention should still be paid to line settings in order to avoid marble effect and changes in aspect after recycling. Different substrates (aluminium, steel, galvanized steel), use of primer, and big changes in film thickness may give a different aspect. Products with different codes should not be mixed even if same colour and gloss. It is recommended that for consistent application and appearance product be fluidized during application.

Application Method	Tribo, Electrostatic
Recycling	Unused powder can be reclaimed using suitable equipment and recycled through the coating system, but a minimum of 70% virgin powder should be used.

Exceptional Corrosion Protection

MT-100 excels in safeguarding metal substrates against corrosive agents, making it ideal for applications exposed to demanding and aggressive environments. Its robust epoxy coat efficiently resists chemical, moisture, and physical stress, extending the lifespan of surfaces and minimizing maintenance costs.

Versatility in Application and Colors

Manufactured as a fine powder, MT-100 easily adapts to a variety of industrial requirements. With multiple colors available per your preferences and electrostatic application compatibility, it delivers both functional protection and attractive finishes for a wide range of surface coating projects.

FAQ's of High performance epoxy powder coating MT-100:

Q: How is High Performance Epoxy Powder Coating MT-100 applied to surfaces?

A: MT-100 is best applied using electrostatic spraying, followed by a baking process at a curing temperature of 180-200C. This ensures a uniform, well-adhered, and high-performance coating layer.

Q: What level of adhesion can be expected on metal substrates?

A: The epoxy powder coating MT-100 offers excellent adhesion to metal surfaces, creating a strong and long-lasting bond that resists peeling and detachment over time.

Q: When should I use MT-100 over other types of coatings?

A: MT-100 is recommended for environments where high corrosion resistance, robust adhesion, and good impact resistance are required, especially in industrial or harsh external settings.

Q: Where should the unopened powder coating be stored for best shelf life?

A: To maintain its optimal properties, MT-100 should be stored in a cool, dry, and well-ventilated area, inside its sealed drum, away from sources of heat and moisture.

Q: What are the benefits of using MT-100 in surface protection?

A: Using MT-100 delivers strong corrosion protection, excellent mechanical flexibility, and superior durability. Its custom color availability and non-toxic formulation further enhance its value for industrial coatings.

Tell us about your requirement