Electronic Components Insulation Powder Coating

Electronic Components Insulation Powder Coating About

An epoxy poweder called as Electronic Components Powder Coating is the coating powder with solid epoxy resin. Taking full advantage of solid epoxy resin, such as mechanical strength, insulation, and heat resistance, we offer a variety of products for insulating and finishing electronic components, rust prevention for metal products, and coatings for motors.

We have a wide range of powder coatings for a variety of electronic component applications.They offer excellent resistance to moisture, heat cycling and paint workability, and environmentally friendly versions are available, such as low temperature curing and halogen free.

Product Parameters:

Our powder coating products are characterized by:

Outstanding chemical resistance, including motor oil, fuel, etc.

100% solids content (VOC-free)

Low coating thickness required to achieve maximum performance

High coating thickness (100+ mil) to achieve medium voltage protection

Excellent cut-through resistance

Excellent edge coverage

High service temperatures

Capability to provide a range of thermal conductivity

Both induction cure and oven cure chemistries

Reduced cost vs. traditional slot liners

Features

Powder coatings for various electronic components.

Features such as heat resistance, moisture resistance, and heat cycle resistance are provided according to the type of component.

Can be applied more thickly than liquid paints.

Collected paint can be reused.

Typical Applications

1Busbar Coating, Switchgear Equipment and High Voltage Fuses

Low voltage (600V) and medium voltage (up to 38kV) busbar coating

Economical formulations enable flexible, one-powder, low & medium voltage manufacturing solutions

UL-listed products with high RTI rating

2Slot Insulation of Motor Iron Armatures and Stators

Class H & Class F-rated epoxy coating powders

Superior edge coverage and dielectric strength

High productivity and long shelf-life stability

3Resistors, Capacitors, Varistors and Passive Electronics

Epoxy coating for passive components including resistors, varistors and capacitor

High temperature stable and excellent thermal cycling materials for ceramic capacitors

Fast-cure and low-temperature pickup materials for film-wrap capacitors

4Toroids, Magnetic and Powder Cores

Low moisture absorbing materials for stable inductance values

UL-listed products

Spray coatable and electrolytic sprayable coating powders

5Epoxy Binder Resin for Pot Cores

Excellent green strength to move parts before curing

Optimized particle size for optimum compression between ferrite alloy and epoxy resin

Low shrinkage to provide minimal magnetic interference